Products
Printing auxiliary series
1.Printing Medium Series
A.Roto printing oil
RP863 roto printing oil is a kind of printing medium with excellent fluidness, moistening, suspensibility, and dispersibility. It has very good steady function, it is not easy to precipitate, delaminate and volatilize even it was set for a long time after mixing with printing glazes and pigments. It can let the printing operation smoothly; get clear, delicate and strong stereo printing patterns, especially suitable for roto-printing of indoor wall tile and rustic tile.
B.Flat printing medium
PM series are suitable for flat printing of rustic floor tile and indoor wall tile. It has properties of excellent fluidness, lubricity, and not easy to stick the screen. The surface of the glaze mixed with PM flat printing mediums will not become "dusting" after printing; screen stuck will not occur during multi printing, fixing agent will not necessary, and the processing will be more environmental protection.
Name |
Code |
Appearance |
Feature |
Guarantee Period |
Packing Specification |
Roto printing oil |
RP863 |
Semi-transparent |
Excellent temperature stability and suspensibility, especial suitable for on-glaze coloring or under glaze coloring roto printing |
One year |
1000KG/plastic bucket |
Flat printing medium |
PM80 |
Semi-transparent or milk liquid |
Non-toxic water base formula, excellent lubricity, reducing the scratch frequently, no screen stuck |
One year |
1000KG/plastic bucket
|
Flat printing medium |
PM90 |
Semi-transparent or milk liquid |
Excellent printing effect with sharp and strong pattern, suitable for multi printing |
One year |
1000KG/plastic bucket |
The situation of screen stuck will usually occur when produce the glaze tile, our printing fixing agent will solve your problem effectively.
Name |
Code |
Appearance |
Proportion |
Usual Dose |
Usage |
Printing fixing agent |
GF |
Transparent viscous liquid |
1.25－1.35 |
1~2% of total glaze volume |
Increase the strength of glaze |
PF |
Transparent viscous liquid |
1.03－1.07 |
10~20%aqueous solution ，30~50g each square brick |
Reduce the screen adhesion |
B.PF is used in the printing process when screen stuck occurred for the reasons of that the surface of glaze get "dusting", when spraying some in the surface of the glaze in the printing process, it can form a thin cover coat and prevent the glaze get "dusting", then can reduce the opportunity of screen stuck in the next printing process.